hp error codes 49.4c02

HP Printer Error Code 49.4 c02

Cause:- The major causes behind the HP printer Error Code 49.4 c02 are due to a print job.

Solution:- What happens when users see an error 49.4 c02 displaying on their HP Printers? The error arises in the printer due to print jobs.

You can always get a HP Printer Support for Code 49.4 c02 from us at a single call.

Besides, if you are a passionate user of 123 HP Com Setup then you can follow the step by step guidance as given below:

1. Delete Print Jobs Queue –

• To delete all the print jobs from your printer you just have to click on the printer icon which is present on the bottom right-hand corner of your computer.
• You have to right click to open the print queue and once the list is open you have to delete all the jobs.

2. Print a Test Page –

• The first step is to switch off the printer.
• Now, disconnect all the cables that plugs to your computer and then switch it back on.
• And, if your HP printer is in ready state when the cable id disconnected.
• Then print a test page.

And, if you are not able to fix the HP printer error code 49.4c02.

3. Disable Advance Printing Features -

• You have to go to Windows logo pictures.
• Then you have to choose the printer queue.
• You have to click on the left click and choose the printing preference.
• You have to select the advance option.
• And under the document option you will choose the advance printing features.
• You have to choose it to disabled.

You can now try printing a test page and if the error persists then you can move on to the next step.

4. Check whether you’re using the Franklin Gothic Book font -

• For PCL 5e and PCL6 drivers: You have to enable the ‘Send True Type as Bitmaps’ which are present under the settings of advanced tab of either of two drivers. It will allow the document to print without causing any trouble.
• For PS drivers: You have to set the true type font download option to Bitmap. It will allow you to print document without any hassle and HP print error code 49.4c02. You have to go to the advanced tab under PostScript options to do the same.

If you want you can also install the font on the printer’s hard drive using a suitable plugin. It will allow the font or document to print without using the Bitmap settings as we have mentioned above.

5. Flash and update the firmware -

• Switch on your printer.
• Now, check whether ready is displayed on the LCD or not.
• You have to try printing a test document.
• You have to check the firmware revision of your printer then you have to do the following:
• You have to press the select button.
• Now, press the down button to highlight information menu.
• Then press select.
• You have to press down the display print configuration on the LCD.
• Try printing a test page.

(Note: Make sure there are no interruptions during the process of upgradation process because it may damage the printer severely.)

• And, once the upgrade is complete your LCD will display ready.
• You have to turn off the printer and wait for about 15 seconds just before turning it on.
• You have to try printing a test page and check the firmware revision as listed under printer information on the test page.

How can you remove Error code 49.4 c02 from your HP Printer?

You can save your Time & Save precious Money by opting IT Phone Service HP Error Code 49.4 c02 Support Service.

HP Printers are popular for their reliable and smooth printing solutions. They provide quality prints and the best imaging, fax, and scanning services. However, there are times when users report issues while they attempt to print something from their devices and an error occurs is one of the most common issues.

The errors are common in every printer and cause the same trouble. They are quite a time-wasting and cost a fortune when it comes to repairing. But with us, you can save both time and money. You can call us on a toll-free number+1(877) 583-7730.

Visit at Printer Support FAQ to get Instant Service, Quick Solutions, and HP Printer Support for Code 49.4 c02.