Post Question Related To Your Printer Errors, Printer Installation, Printer Setup, Printer Support, Printer Customer Care All in One Place. For All Brand Like Hp Printer, Brother Printer, Epson Printer, Lexmark Printer etc.
Notifications
Clear all
Samsung Printer Error Code FAQ
1
Posts
1
Users
0
Likes
416
Views
Jan 06, 2023 9:07 am
Cause: The failure of the Actuator motor is the primary cause of Samsung printer error a1-4111. The error is caused by an incorrect network connection.
Solution: If you own a Samsung printer, you can follow the step-by-step instructions below:
- Taking off the Right Side Panel -
- First, turn off the power supply and disconnect the power cords.
- You must also disconnect any data cables.
- Because most printers have five screws that must be removed first. And, depending on the model, these will differ.
- On the front, open the large lower front cover and then remove three screws on the printer's front right side.
- Turn your printer backwards and then open the printer's back cover.
- Remove two screws and their respective panel positions.
- Finally, slide the right-side cover towards the back end.
- Also, make sure it comes easily and quickly so you can set it aside.
- Repair the solenoid -
- You must first remove the retaining screws.
- Take it out and activate the work mode.
- If it is missing, look around, and as the stickiness fades, a few layers of masking tape cut into small square pieces can be used to correct the error.
- Simply reposition the foam pad and ensure that it is properly stuck only under the tab.
- Reassemble and test the unit -
- If you don't want to touch any open electronics, connect the power cord to the source and see if the error goes away.
- You must carefully inspect the motors and solenoids to ensure that they are operational and spinning properly.
- You must now select power-up sequencing.
- The next step is to unplug the power cord so that you can reinstall the panel.
- You must begin reversing the disassembly steps.
- Also, make certain that the screws are placed in a different location and into the correct hole.
- Finally, connect your printer and have fun.
If you have not resolved your problem, please contact us and feel free to seek the assistance of our experts.
For more information on why your Samsung printer is not printing, please call us at +1 (855) 460-7382.
Samsung Printer Support provides immediate service and quick solutions.
