Post Question Related To Your Printer Errors, Printer Installation, Printer Setup, Printer Support, Printer Customer Care All in One Place. For All Brand Like Hp Printer, Brother Printer, Epson Printer, Lexmark Printer etc.
Toshiba printer error code C130 can be a frustrating experience for any user. This error code indicates a problem with the printer's fuser unit, which is responsible for bonding the toner to the paper. If the fuser unit is damaged or not functioning correctly, the printer will display the C130 error code. In this article, we will discuss the causes of this error code and provide step-by-step instructions on how to fix it.
Causes of Toshiba Printer Error Code C130
- Damaged or worn fuser unit: The most common cause of the C130 error code is a damaged or worn fuser unit. Over time, the fuser unit can become damaged due to heavy use, which can cause the toner to not adhere properly to the paper.
- Incorrect fuser temperature: The fuser unit must be set to the correct temperature in order for the toner to bond to the paper. If the temperature is too low, the toner will not bond properly, and the C130 error code will be displayed.
- Foreign objects in the fuser unit: The fuser unit can also become clogged with foreign objects, such as paper particles or toner dust, which can interfere with the toner bonding process.
Solution :
- Check the fuser unit: The first step in fixing the C130 error code is to check the fuser unit. If the fuser unit is damaged or worn, it will need to be replaced.
- Verify the fuser temperature: To verify the fuser temperature, consult the user manual for your Toshiba printer. The manual will provide instructions on how to check and adjust the temperature, if necessary.
- Clean the fuser unit: If the fuser unit is clogged with foreign objects, it will need to be cleaned. To clean the fuser unit, turn off the printer and unplug it from the power source. Then, gently remove any foreign objects from the fuser unit, being careful not to damage the delicate components.
- Reset the printer: If the C130 error code continues to display after checking and fixing the fuser unit, it may be necessary to reset the printer. This can be done by unplugging the printer from the power source for several minutes, and then plugging it back in and turning it on.
Conclusion :
Toshiba printer error code C130 can be a frustrating experience, but it can be fixed. By following the steps outlined in this article, you should be able to diagnose and fix the issue in no time. If the problem persists, it may be necessary to seek assistance from a professional Toshiba printer customer service technician.
